ICASSP 2012 paper(s)

View of the Kyoto Tower, image from
Wikipedia, by Bernard Gagnon

Well, the ICASSP 2012 reviews came in yesterday.  For me, there were mixed results: one paper accepted and one paper rejected.  The paper that got rejected I was really hoping for because it's my own idea and thus I would HAVE to present it (along with a brief vacation in Japan, of course!) while the other is a collaboration with a (now former) colleague, Mahmood Movassagh.  Hopefully we can both go to the conference, but we'll still have to fight it out who gets to present it. ;-)

The accepted paper is "JOINT ENTROPY-SCALABLE CODING OF AUDIO SIGNALS" by Mahmood Movassagh, Joachim Thiemann and Peter Kabal, an examination of a Huffman-coding like bit allocation that allows for scalable transmission and decoding. A key part is the joining of adjacent quantization regions which I talked about a bit in a previous post.

The rejected paper is on tonal perception applied to singing voice detection.  One positive note is that ICASSP reviews in general are very thorough and useful for making improvements.  I will continue working on the idea; perhaps ICASSP wasn't the best venue for that work anyways.  I'm now looking at ISMIR as a better place to submit the revised paper to.

LASERS!

Playing with Arduino and Lasers. This is part of a SUPER SECRET!! research project with Philip Roche of the McGill Photonics Lab.

Running at low power for alignment...

FULL POWER! FOR GREAT JUSTICE!

More on this as it develops...

A view on the first year of my blog

It's now one year since I've started this blog.  I haven't done as much blogging as I set out to do, but that was to be expected; overall there are now 27 posts (28 if you count this one), 19 of which have actual technical content.  I consider this actually pretty good, for my standards.  The trick of course is to make next year better!  I'll have to juggle that with my new life in Rennes, but it's a challenge I can rise up to!

Popularity-wise this blog has not done too badly either.  Blogger reports about 1864 hits to date; the most popular article being about my Amiga 1000 mod - though if taken together, the SIDschield articles are the main draw (this is counting individual article hits only - blogger can't show tag requests AFAICT).  The SIDshield is something I definitively will continue working on, but I think I will focus more on VHDL once I'm in Rennes.  I think I will shift my focus on the research and MATLAB related content in the future.

Weirdly, I have only ever received one comment, on Further adventures with Mercurial, which is now effectively out of date (the relevant packages on the latest Ubuntu releases are at sufficiently high versions).  It's a pity; any blog writer really likes comments, it makes one feel relevant. :-)

Onwards to the next year of posting!

Moving my research and projects homepage

As mentioned in a previous post, I am currently finishing up my work at McGill University, and then start a postdoc with the METISS Speech and audio data modelling and processing group at the Universite de Rennes 1.  As a result, I will soon be loosing my webspace at McGill, and had to find a new home for my research descriptions and my other projects.   UPDATE: That link is long dead.

I did investigate various paid hosting methods - and for the minimal amount of traffic I have seen on my homepage, even $5/month would seem excessive.  One alternative is using Amazon to host it (Amazon S3 would probably work well) - but then I found out that bitbucket can host static websites (and it's free!) Since my website is really only about open projects (such as the SIDshield, VHDL experiments, etc. - much of which ends up on this blog, anyways) it's an appropriate site to have my page hosted there, I think.  The only other personal stuff that might need high bandwidth are pictures I like posting - and those I put on Picasa and Panoramio; trip travelogues should go to another blog.

Bitbucket webpage hosting works in a way that I really like.  It's all version controlled, of course, using Mercurial - and the server actually just displays the tip of a specific repository.  This means I can do all the editing on any computer with a clone of the repository; once I am happy with the changes I'll commit and do a "hg push" to bitbucket.  Done.  My previous webpage was also version controlled of course (subversion first, then Mercurial), but I had an extra script I needed to execute to push the new version onto the server, using a pile of scp commands.  A pain if I did't happen to want to copy the private key to the machine I'm on.  UPDATE: yeah, I'm using git now.  Like everyone else.

So, I'll try keeping it there for the time being.  It supports custom domains, then if I register a domain for myself, I can redirect it there.

The MATLAB code for my Thesis

To my shock and surprise, it turns out that someone other than my committee has actually been reading my thesis.  In fact, Mr. Gao Ge (高戈) of Wuhan University has been looking into my work in such detail that a typographical mistake in Eq. 5.2 was discovered: it should read
$f_m = \frac{1000}{4.37}(10^{\frac{ERB_m}{21.4}}-1)$
which he discovered by comparing the thesis with my 2007 INTERSPEECH paper. (For those of you for whom the math is not displaying correctly, that's f_m = 1000/4.37 (10^(ERB_m/21.4)-1): the exponentiation is kinda important...)  I thank Mr. Gao for his vigilance.

As part of his questions, he has asked if he could see the MATLAB code I used to do my simulations.  Now, the code was mostly over a year old, not very clean and distributed all over the file system of my computer, but I decided it's worth the effort to try to collect it all in case someone else wants to continue research in a similar direction.  And I finally sat down and did just that, and as of now, you can find it here or here.  But no, the code is still not very clean.  However, it seems to run - all you need extra AFAIK is the Signal Processing Toolbox.  You also need to supply your own mono, 16 kHz sampled wave file, which you need to point to in line 64 of RunThesisCode.m.

I'm putting this code out there under the Creative Commons Attribution 3.0 Unported License, and make absolutely no claim that this code is useable for any purpose whatsoever, nor that it is an accurate representation of what I used to run the tests.  However, I hope that the code will be useful to understand the ideas I'm trying to explain in my thesis.

Update: Real Life interference

I haven't been updating this blog since Real Life (tm) has this nasty habit of making me too busy to work on fun projects.

The first thing that has taken over my time is that I was recruited into being the co-instructor for the ECSE-436: Signal Processing Hardware course here at McGill.  This is actually a fun course to teach: I get to teach the kids all about C programming, actual real-world DSP usage, hardware, fixed-point arithmetic, etc.  The final project this year is to implement a simplified voice-band modem (the DSP portion only).  Not quite as cool as the projects we have had them do in previous years (when I was a TA for the course in previous years, we had them do wavetable synthesizers, guitar effect boxes and time-scale modification of speech), but due to external factors the schedule got a bit squeezed.  Still, I think the students are learning quite a bit, and I know some of them are keen to perhaps study more advanced DSP in the future.

The other major thing is that I have accepted a new job, to start in January.  Well, technically, it's a postdoc position - it's like a job, but more work and less pay.  Still, I'm looking forward to it as it is with a very good group: the METISS group at IRISA.  This of course means moving from Montreal to Rennes, France - not a simple task if you have to move an entire household and sell the house!

And while I did get two papers submitted to ICASSP 2012 (one first-author, the other second author) I am still working on a journal paper.  And I really want to get that done before we pack up to move.

I do try to squeeze a little bit of VHDL coding in here and there; as someone on the classiccmp list noted, Xilinx ISE is no longer a horrible mess on Linux, so I did install it on my main work machine (that actually has a decent amount of RAM).  So far, I was using it on an old P4 with 1 Gig RAM which was unbearably slow.  Or maybe I'm just spoiled.

One of these days I will also program the Arduino a bit again.  Real soon now.

Playing with VHDL

On my old website there are two projects using VHDL on a Spartan-3e FPGA.  Recently, I decided to get back to playing with that again.  The project goal this time was to produce a VGA output - in FPGA circles, this is by now the equivalent of a "Hello, World!" program.  Nothing new, but I felt it was important to do from scratch without copying any bits so I see how the whole thing fits together.

The Spartan 3e "S3E Sample Pack" board, a freebie I picked up a few years back.

The picture shows the board and the VGA connector: with only 4 I/O pins on one connector, I made it a monochrome (green) only interface.  The pins used are horizontal sync, vertical sync, and 2 bits of video signal.  With a bit of soldering I could make it monochrome grey, or I could add another connector to get more output lines to get real color.  For playing with synchronization, the quick and dirty adapter giving 4 intensities of green (well, 3 green plus black) is quite sufficient.  (...more...)